First, you will need to make the red portion of the vampire teeth. In order to create the teeth, you will need 24 grams red play dough soap. To color our soap dough, we used 30 drops of the tomato red soap colorant. The Play Dough Soap Recipe can be found here
. Once you have prepared the red play dough soap, simply press it into the gum portions of the vampire teeth mold. You will need to fill each cavity of the mold. Once you have placed the red portion, you can use a cotton swab to remove any red soap dough that may have made its way to the actual teeth portion of the mold.
Step 2: Next, you will need to create the white portion of the vampire teeth. So, weigh out and melt 136 grams of the hemp oil melt and pour soap. Once melted, add 6 grams of Vamp Vogue Fragrance Oil and 6 grams of Vanilla White Color Stabilizer. Then, stir and pour the melted soap into each cavity of the vampire teeth mold. Finally, spray the soap with rubbing alcohol to release any air bubbles. Allow the teeth to fully setup before removing them from the mold.
Step 3: Prepare the white portion of the soap. Weigh out and melt 870 grams of the hemp oil soap base. Once melted, add 43 grams of the Vamp Vogue Fragrance Oil. In addition, add 43 grams of the Vanilla White Color Stabilizer. Stir. Then, pour the melted soap into your two pound soap mold. Spray the soap with rubbing alcohol to release any air bubbles and allow the soap to setup. Note: If you are using the silicone 4 loaf mold, you will need to divide the soap equally between two of the cavities in the mold.
Step 4: Now, melt 200 grams of the Diamond Clear Melt and Pour Soap Base. Once melted add 10 grams of the Vamp Vogue Fragrance Oil, 10 grams of the Vanilla White Color Stabilizer, and 6 drops of the Tomato Red FUN Soap. Finally, spray the white soap with rubbing alcohol and pour the red soap directly on top of it.
Step 5: We will begin placing the teeth. The timing is very important in this step. You will want your red layer of soap to begin to setup. However, you do not want it to completely setup. It should have a somewhat thick film formed but should still be soft and will have a somewhat rubbery feel to it. Once the soap is ready, spray the red soap with rubbing alcohol. Then, gently press the teeth into the soap mold. Allow the soap to finish setting up.
Step 6: Once your soap has setup, use the mitre box and cutter to slice your soap.
Step 7: Finally, we will drip each slice of soap with red melt and pour soap. So, in a small bowl, melt 30 grams of Natures Garden’s Diamond Clear Melt and Pour Soap. Then, add 1 gram of the Vamp Vogue Fragrance Oil, 1 gram Vanilla White Color Stabilizer, and 3 drops of the Tomato Red FUN Soap Colorant and stir. Use a disposable pipette to drip red soap vertically down the white soap. You want it to have the look of blood dripping from the vampire teeth.
Step 8: Once your soap has setup, it is ready to use!
Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients.