Step 1: Prepare your molds. You will need both the 3 x 4.5 inch and the 3 x 6.5 inch round pillar mold. Place a CD wick through the hole in the bottom of each of the molds. Then, you can place a plug in the bottom of the mold. Alternatively, you can use hot glue to completely seal the hole.
Step 2: Now, weigh out and melt 40 ounces of Palm Pillar Wax. Melt the wax to 210F using a double boiler.
Step 3: Once melted, use a toothpick to add a very small amount of the red liquid candle dye. Stir.
Step 4: Now, add 4 ounces of the Carnation Fragrance Oil. Once again, stir.
Step 5: Pour the wax into the molds leaving about ½” in the event that a second pour is needed.
Step 6: When the wax has setup, but is still warm, poke relief holes.
Step 7: Reheat the remaining wax to 210F and pour it into the molds.
Step 8: Once the candles have setup, remove them from the molds and trim the wicks.
Your palm pillar candles are ready to use! Enjoy!
Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.