Colorants for Yellow CP Soap:
5 drops Neon Yellow FUN Soap Colorant
Colorants for Lavender CP Soap:
5 drops Ultramarine Violet FUN Soap Colorant
Colorants for Purple CP Soap:
25 drops Ultramarine Violet FUN Soap Colorant
Colorants for Purple CP Soap:
7 grams Titanium Dioxide
(mixed with a small amount of your soaping oils)
Amounts for Yellow MP Soap:
175 grams Diamond Clear Melt and Pour Soap Base
2 drops Neon Yellow FUN Soap Colorant
8 grams Sparkling Lavender Lemonade Fragrance Oil
Clean & Sanitize your work area and all of your packaging materials. It is suggested that you wear gloves, protective clothing, a face mask, safety glasses, and a hair net while preparing this recipe.
Step 1: Prepare your lye solution. Allow the lye solution to cool to room temperature.
Step 2: While you are waiting for your lye solution to cool, prepare your soaping oils. Once your oils are melted, allow them to cool to room temperature.
Step 3: While you are waiting for your oils and lye solution to cool, titanium dioxide mixture as listed above.
Step 4: When both the soaping oils and the lye solution are at room temperature, prepare the melt and pour soap. Weigh out and melt the Diamond Clear MP Soap Base. Once melted add the fragrance oil and colorant. Stir. Set aside.
Step 5: Next, combine the lye solution with the soaping oils. Next, stick blend the soap batter to emulsify the ingredients. Next, add the Sparkling Lavender Lemonade Fragrance Oil. Once again, stick blend your soap batter to incorporate the scent.
Step 6: Begin dividing the soap batter. First, divide the soap batter in half. To one half, add the titanium dioxide mixture.
Step 7: Divide the remaining batter equally into three bowls. To one bowl, add the yellow colorant. To the second bowl, add the lavender colorant, and to the third bowl the darker purple colorant. Stir the contents on each bowl to blend the colorants.
Step 8: Now we will begin pouring the soap. First, pour all of the white soap batter into the mold. Place the mold in front of you. Pour the lavender soap batter in a line down the length of the mold. Repeat this process, pouring three of these lines. One on the right, one down the center, and one on the left.
Step 9: Pour the melt and pour soap next in the same manner you poured the lavender soap batter. Then, pour the darker purple in the same manner and finally, the yellow CP soap batter. Repeat the process, you will want to use all of the MP soap batter, but save about two ounces of each color of CP soap batter to top your soap.
Step 10: When topping the soap, pour a line of each color down the length of the mold. Then, use a skewer to swirl the top of the soap until you are happy with the swirls.
Step 11: Allow your soap to set up before removing it from the mold. Wait about 48 hours before cutting the soap. Then, allow it to cure for 4-6 weeks.
We hope that you enjoy this cold process soap recipe!
Nature’s Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Nature’s Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.